Origin	China
Brand Name	APPEXL
Material	BOPP
Type	Adhesive Film
Usage	Laminating Pouches

Professional producer for BOPP Thermal Laminating Film.
Typical thickness: Glossy 25mic(12BOPP+13EVA) and Matte 27mic(15BOPP+12EVA). Single or double corona treatment.
20 days delivery of a 40feet container!

As an environmental friendly product, BOPP Thermal Laminating Film features as below:
#1 Healthy Lamination Process
It is non-hazardous to health and safe to use as being without toxic gases nor volatile content.
It is also safe during laminating process due to no solvent-based adhesive used.
#2 Easy Operation
It requires no action of using and blending the rubber, solvent, diluent and so on which is much easier during handling and cost-saved compared with the old way.
No special technique required, just laminate when the temperature gets adequate.
It is recommended to laminate the film with dry laminator. Just small adjustment to the machine needed if the film is laminated with wet laminator...
#3 High Efficiency and Energy-saving
Production cost is substantially reduced due to no wastage of film generated, no mixing of adhesive, no coating and drying processes, nor UV heating lamp required.
#4 Outstanding Function and Effect
It enhances the finished item's value through high transparency and super luster finish.
Preventing lamination from being pressed, bubbled and desquamated.
Protected from harmful substances and water-proof, ensuring a long life storage for the printings.
Particularly, matte BOPP Thermal Lamination Film is good for spot UV and hot stamping.

APPLIED TO
Books, Posters, Presentation Folders, Labels, Shopping Bag, POP Signs, Document, Book Covers, ID Cards, License, Passports, Antigraffiti, Boardmaking,
Write on/wipe off Calendars, Photographs, Albums ect.
Outside coating for wrapping box or bag for food, medicine, cosmetic, gift, liquor etc.
Drawing paper, documents, advertisement, digital printing, show board, etc.

PRODUCT        TECHNICAL        PARAMETER
THICKNESS (micron)	BOPP (BASE)	12 micron	12 micron	15 micron	15 micron	15 micron
	EVA (GLUE)	8 micron	13 micron	10 micron	12 micron	13 micron
	TOTAL	20 micron	25 micron	25 micron	27 micron	28 micron
TYPES	Glossy	√	√	√	√	√
	Matte			√	√	√
Customized thickness-combination Available
Yield/Ration	Glossy	54.230m2/kg	44.215m2/kg	43.526m2/kg	40.212m2/kg	38.655m2/kg
	Matte			44.843m2/kg	41.344m2/kg	37.174m2/kg
THICKNESS TOLERANCE	±1.5um
WIDTH RANGE per roll	300mm---1600mm   (±5mm)
LENGTH RANGE per roll	2000m, 3000m, 4000m   (±3%)
PAPER CORE (INNER DIA.)	25.4mm (1");   76mm (3")
CONNECTOR/BONDING	≤ 1
CORONA TREATMENT SIDE	one side or both sides
SUR. TENSION (AFT. CORONA)	≥ 42dyne
APPLICATION MANUAL
COMPOUND TEMPERATURE	85--110C        (185-230F)
COMPOUND PRESSURE	10--18mpa
COMPOUND SPEED	10--60m/min
APPLICATION GUIDANCE * Better to be used in dry laminator. Small adjustment to the machine required when used in wet laminator. * Normal process temperature is 90C-105C (203F - 221F), roller pressure and temperature vary from      different types of paper, ink and machines. * When using the film for the first time or doing other treatment, please try a small volume before massive     laminating. * Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture   or powder. * Make sure to put the material in place with low temperature and dry. * The following situation will affect the final quality of the film during lamination.   a. metal ink   b. ink containing too much wax, dried oil, adhesive, silicon additive and so on.    c. too much thick ink                                d. ink completely undried  yet    e. too much humid paper sheet             f. too much powder on the surface